Harpoon profiles for stretch ceilings
Light lines for stretch ceilings
Light lines sit in the stretch ceiling plane as aluminium profile, LED strip and diffuser. The PVC membrane closes with the harpoon. LIGHTRA splits the membrane and forms the line at 15, 30 or 50 mm. The narrow 15 mm line can also carry a curtain track. At 30 mm a low version keeps more room height. At 50 mm the profile takes more LED and suits brighter light. LAMPLIX in 30 and 50 mm mounts on the surface, hangs or recesses. Clip-in profiles for fabric are under Light lines.
LAMPLIX X930
LAMPLIX X950
LIGHTRA X015
LIGHTRA X030
LIGHTRA X030 S
LIGHTRA X050
Classic profiles for stretch ceilings
CLASSIX is the classic wall or transition profile with harpoon, without a shadow gap. For an open shadow gap choose INVISIA. CLASSIX NX130 is the welded transition corner of this series.
CLASSIX X101
CLASSIX X130
CLASSIX X140
Shadow gap for stretch ceilings
With a shadow gap profile, the stretch ceiling ends at the wall in an open, even gap with no insert. The INVISIA range is made for harpoon PVC membranes and comes in two gap widths. A 5 mm gap comes from X201 on the wall, the reinforced X202 for large rooms and X208 fixed to the structural ceiling. A 7.7 mm gap comes from X205 with hidden fixing, its ceiling partner X206, the dividing profile X204 and X209 for stairwells and roof windows. X207 is a linear slot diffuser that uses the gap for ventilation. The LED version is the FLOATIA range.
INVISIA X201
INVISIA X202
INVISIA X204
INVISIA X205
INVISIA X206
INVISIA X207
INVISIA X208
INVISIA X209
Floating ceiling profiles for stretch ceilings
FLOATIA harpoon profiles create a floating edge with an LED zone on PVC stretch ceilings. X301: 15 mm on the wall without a diffuser. X302: 15 mm on the wall with diffuser INSERTA Y015 F. X303: ceiling mounting where the wall cannot take the load. X304: 29 mm contour with light aimed at the wall. Without LED, INVISIA stays under shadow gaps; light lines in the plane sit under light lines.
FLOATIA X301
FLOATIA X302
FLOATIA X303
FLOATIA X304
Curtain profiles for stretch ceilings
A curtain niche hides the tracks above the stretch ceiling, so the curtain drops straight from the ceiling. The CURTINA range is made for harpoon PVC membranes. Ready-made semi-closed niches are X402 with two tracks, X403 and X404 with three, and X412 with two tracks and LED. Closed niches with LED are X405 and the larger X405 M. X406 (double, with LED) and X407 (single) are curtain tracks for surface mounting, flush with the ceiling or in a niche, and X408 to X411 are LED niches made for those tracks. For clip-in stretch ceilings in PVC or fabric there is TISSURE.
CURTINA X402
CURTINA X403
CURTINA X404
CURTINA X405
CURTINA X405 M
CURTINA X406
CURTINA X407
CURTINA X408
CURTINA X409
CURTINA X410
CURTINA X411
CURTINA X412
Contour profiles for stretch ceilings
CONTURA X601 is the wall contour profile: an LED shelf shines down through the membrane along the wall, without a separate diffuser. For a light line in the ceiling surface choose LIGHTRA; for a floating LED edge, FLOATIA.
CONTURA X601
Two-level profiles for stretch ceilings
STRATOS builds a height step between two PVC membrane planes with a harpoon – for a two-level stretch ceiling or a ceiling niche. X701 closes the step with a decorative insert; X702 carries an LED strip and diffuser; X703 and X704 serve niches and wall bypasses; X705 and X706 stay in the same line with a different section. For fabric without harpoon, see clip-in profiles / two-level (UNITEXA Z701).
STRATOS X701
STRATOS X702
STRATOS X703
STRATOS X704
STRATOS X705
STRATOS X706
Magnetic tracks for stretch ceilings
MAGTRAK X508 is the 48 V magnetic track for harpoon PVC ceilings, for magnetic luminaires. End cap Y215 belongs here. The clip-in equivalent is VOLTIVA Z501.
MAGTRAK X508
All products
AEROOOM