Accessories for stretch ceilings
Light diffusers for stretch ceiling profiles
A light diffuser closes the LED groove in the profile and spreads the strip light along the stretch ceiling line. Polycarbonate DIFFUSY follows LIGHTRA and CURTINA X406 widths. PVC INSERTA Y015, Y015 F and Y030 fit light lines, height steps and FLOATIA X302/X303. Linear slot diffusers for air sit under Ventilation.
DIFFUSY Y108
DIFFUSY Y114
DIFFUSY Y130
DIFFUSY Y134
DIFFUSY Y150
INSERTA Y015
INSERTA Y015 F
INSERTA Y030
Inserts for stretch ceiling profiles
Inserts close the visible harpoon groove, the cut edge or the wall line after install. Y001 fits CLASSIX X130, X101 and CONTURA X601. Y002 protects the membrane on sawn profile ends. Y008 is the decorative insert in the groove. Light diffusers for LED sit under Light diffusers.
End caps for stretch ceiling profiles
End caps close open profile ends and keep geometry at the joint. Fit follows the profile: Y series and colours match that model. Open the matching end cap or the profile product page.
ENDCAPP Y201
ENDCAPP Y202
ENDCAPP Y203
ENDCAPP Y204
ENDCAPP Y205
ENDCAPP Y206
ENDCAPP Y207
ENDCAPP Y208
ENDCAPP Y209
ENDCAPP Y210
ENDCAPP Y211
ENDCAPP Y212
ENDCAPP Y213
ENDCAPP Y214
ENDCAPP Y215
Hooks and gliders for curtain tracks
Hooks and gliders run in the curtain-niche rail. HOOKARA Y701 is the roller hook, SLIDENE Y702 and Y703 are gliders, HOOKEND Y704 holds them before the exit opening. The niche profile itself is under curtain profiles.
HOOKARA Y701
HOOKEND Y704
SLIDENE Y702
SLIDENE Y703
Connectors for stretch ceiling profiles
Straight and angle JOINTEK connectors join profile sections and keep alignment. Y603/Y604 fit LUMNOVA Z008, TISSURE Z401 and UNITEXA Z701. Y605/Y606 fit MAGTRAK X508, TISSURE Z405 and VOLTIVA Z501. Not welded NX corners.
JOINTEK Y603
JOINTEK Y604
JOINTEK Y605
JOINTEK Y606
Installation tools for stretch ceilings
Tools for harpoon and membrane: SPATULA spatulas to insert, PRASEKA punch for the curtain track, STABILE saw guides and STUSLON mitre tools for diffuser and profile cuts. Not spare parts for profiles.
PRASEKA Y805
SPATULA Y801
SPATULA Y802
SPATULA Y803
SPATULA Y804
STABILE Y904
STABILE Y905
STABILE Y906
STUSLON Y901
STUSLON Y902
STUSLON Y903
Brackets for stretch ceilings
ANGLOVA Y401 is a galvanised-steel ceiling bracket. It carries the profile on the soffit with self-drilling screws. Do not confuse it with welded series corners under ready-made corners.
ANGLOVA Y401
AEROOOM Y911 spigot for slot diffusers
The connection spigot AEROOOM Y911 connects the slot diffusers AEROOOM, AERROLL and INVISIA X207 to a 110 × 55 mm flat duct and works for both supply and extract air. A Ø100 mm round duct is connected via a standard 110 × 55 / Ø100 mm adapter. The slot diffusers themselves are in the ventilation section.
AEROOOM Y911
Clips for stretch ceiling profiles
LOCKIUM Y301 is the clip that holds the membrane in a clip-in profile – PVC and fabric without a harpoon. It snaps into the groove. The profile range is under clip-in profiles; LUMNOVA is the light line, not this clip.
LOCKIUM Y301
BANDURA mounting profile for stretch ceiling systems
BANDURA X801 is the mounting profile in accessories. At a joint it connects two profiles; on a curve it holds their shape. It is fastened with self-tapping screws to those profiles. It is not a light line and not a shadow gap profile – those sit in their own shelves.
BANDURA X801
Frequently asked questions
How do I pick the right accessory?
By subgroup: end caps, diffusers, connectors, clips, hooks, tools, bracket, mounting profile or connection spigot. Each product page states which profile it fits.
Is one end cap universal?
No. ENDCAPP is model-specific. The Y series follows the profile – for example Y201 with LIGHTRA X015.
What is the Y911 spigot for?
It links the AEROOOM, AERROLL and INVISIA X207 slot diffusers to the flat duct. You do not need it for a light line.